Refrigerant R407c, 5 lbs, Sealed, #1 R22 Replacement, ProSealXL4 Sealer & Hose

Description

Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
Refrigerant R407c, 5 lbs, Sealed, #1 R22 Replacement, ProSealXL4 Sealer & Hose
(1) 5 Lb. Tank Of Refrigerant R-407c which is THE BEST replacement for R22
.
(1) 36" Charging Hose
(1) Envirosafe ProSealXL4 Injector
*This will screw onto the suction service port (Larger Line).
Connect the charging hose
coming
from the refrigerant can to the
injector
.
Added the refrigerant that will push the product in as need to fully charge the system.
Envirosafe PSXL4 Injector
One of our most requested products, Enviro-Safe® ProSeal Xl4 Inject with is a small, concentrated, easy inject refrigerant leak sealant.
ProSeal XL4 Inject is compatible with all refrigerants except ammonia. This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Enviro-Safe™ has been producing and packaging sealants for over 17 years. Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014.
Unlike most other products on the market, ProSeal XL4 Inject travels with the gas, which makes it faster, and more effective at finding leaks.
ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions.
Forms a hard seal on metal, schrader valves,
O-rings
, gaskets, a/c condensers, evaporators, line sets and solder joints
Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary.
If there is still Proseal XL4 in the system it will reseal the schrader.
This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils
DO NOT use in ammonia systems
One-time use
Concentrated
No need to pump-down R410 or other units
No injection-hose or caulk-gun needed
Concentrated formula means less material in the system
*The tank is factory sealed in the new EPA & AHRI required color for ALL new tanks made as of 2020. (Gray)
The best replacement for R-22 Refrigerant is R-407c.
It has a very low loss in capacity (0 – 5%) relative to R-22 and is less expensive than many other R-22 replacement refrigerants.
Applications:
Residential Air Conditiong Systems
Industrial Refrigeration Coolers Freezers
Industrial & Commercial Air Conditioning systems including Chillers.
Our 5 Lb. Tank of Refrigerant R-407c comes in a  factory Sealed Cylinder.
Refrigearant R-407c is used as a replacement for R22 systems.
(1) 5 lb. R-407c Factory Sealed Can.
The hose connection is standard, 1/4" male flare.
R407C
R407C is an HFC blend designed to have similar properties to R22 in air conditioning systems. R407C is suitable for residential & light air conditioning and direct expansion air conditioning systems. It is also used in medium temperature refrigeration systems.
The condition is new and the tank is factory sealed in the new, as of 2020, tank color which is gray.
You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.
You must show proof of certification before paying and before the item is shipped.
*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.
Thank you.
SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.
The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.
(1) 5 Lb. Tank Of Refrigerant R-407c which is THE BEST replacement for R22 . (1) 36" Charging Hose (1) Envirosafe ProSealXL4 Injector *This will screw onto the suction service port (Larger Line). Connect the charging hose coming from the refrigerant can to the injector. Added the refrigerant that will push the product in as need to fully charge the system. Envirosafe PSXL4 Injector One of our most requested products, Enviro-Safe® ProSeal Xl4 Inject with is a small, concentrated, easy inject refrigerant leak sealant. ProSeal XL4 Inject is compatible with all refrigerants except ammonia. This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units. Enviro-Safe™ has been producing and packaging sealants for over 17 years. Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014. ---Unlike most other products on the market, ProSeal XL4 Inject travels with the gas, which makes it faster, and more effective at finding leaks. ---ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions. ---Forms a hard seal on metal, schrader valves, O-rings, gaskets, a/c condensers, evaporators, line sets and solder joints ---Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary. ---If there is still Proseal XL4 in the system it will reseal the schrader. ---This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units. ---Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils ---DO NOT use in ammonia systems ---One-time use ---Concentrated ---No need to pump-down R410 or other units ---No injection-hose or caulk-gun needed ---Concentrated formula means less material in the system *The tank is factory sealed in the new EPA & AHRI required color for ALL new tanks made as of 2020. (Gray) The best replacement for R-22 Refrigerant is R-407c. It has a very low loss in capacity (0 – 5%) relative to R-22 and is less expensive than many other R-22 replacement refrigerants. Applications: Residential Air Conditiong Systems Industrial Refrigeration Coolers Freezers Industrial & Commercial Air Conditioning systems including Chillers. Our 5 Lb. Tank of Refrigerant R-407c comes in a factory Sealed Cylinder. Refrigearant R-407c is used as a replacement for R22 systems. (1) 5 lb. R-407c Factory Sealed Can. The hose connection is standard, 1/4" male flare. R407C R407C is an HFC blend designed to have similar properties to R22 in air conditioning systems. R407C is suitable for residential & light air conditioning and direct expansion air conditioning systems. It is also used in medium temperature refrigeration systems. The condition is new and the tank is factory sealed in the new, as of 2020, tank color which is gray.
Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
Refrigerant R407c, 5 lbs, Sealed, #1 R22 Replacement, ProSealXL4 Sealer & Hose
(1) 5 Lb. Tank Of Refrigerant R-407c which is THE BEST replacement for R22
.
(1) 36" Charging Hose
(1) Envirosafe ProSealXL4 Injector
*This will screw onto the suction service port (Larger Line).
Connect the charging hose
coming
from the refrigerant can to the
injector
.
Added the refrigerant that will push the product in as need to fully charge the system.
Envirosafe PSXL4 Injector
One of our most requested products, Enviro-Safe® ProSeal Xl4 Inject with is a small, concentrated, easy inject refrigerant leak sealant.
ProSeal XL4 Inject is compatible with all refrigerants except ammonia. This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Enviro-Safe™ has been producing and packaging sealants for over 17 years. Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014.
Unlike most other products on the market, ProSeal XL4 Inject travels with the gas, which makes it faster, and more effective at finding leaks.
ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions.
Forms a hard seal on metal, schrader valves,
O-rings
, gaskets, a/c condensers, evaporators, line sets and solder joints
Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary.
If there is still Proseal XL4 in the system it will reseal the schrader.
This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils
DO NOT use in ammonia systems
One-time use
Concentrated
No need to pump-down R410 or other units
No injection-hose or caulk-gun needed
Concentrated formula means less material in the system
*The tank is factory sealed in the new EPA & AHRI required color for ALL new tanks made as of 2020. (Gray)
The best replacement for R-22 Refrigerant is R-407c.
It has a very low loss in capacity (0 – 5%) relative to R-22 and is less expensive than many other R-22 replacement refrigerants.
Applications:
Residential Air Conditiong Systems
Industrial Refrigeration Coolers Freezers
Industrial & Commercial Air Conditioning systems including Chillers.
Our 5 Lb. Tank of Refrigerant R-407c comes in a  factory Sealed Cylinder.
Refrigearant R-407c is used as a replacement for R22 systems.
(1) 5 lb. R-407c Factory Sealed Can.
The hose connection is standard, 1/4" male flare.
R407C
R407C is an HFC blend designed to have similar properties to R22 in air conditioning systems. R407C is suitable for residential & light air conditioning and direct expansion air conditioning systems. It is also used in medium temperature refrigeration systems.
The condition is new and the tank is factory sealed in the new, as of 2020, tank color which is gray.
You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.
You must show proof of certification before paying and before the item is shipped.
*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.
Thank you.
SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.
The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.
(1) 5 Lb. Tank Of Refrigerant R-407c which is THE BEST replacement for R22
.
(1) 36" Charging Hose
(1) Envirosafe ProSealXL4 Injector
*This will screw onto the suction service port (Larger Line).
Connect the charging hose
coming
from the refrigerant can to the
injector
.
Added the refrigerant that will push the product in as need to fully charge the system.
Envirosafe PSXL4 Injector
One of our most requested products, Enviro-Safe® ProSeal Xl4 Inject with is a small, concentrated, easy inject refrigerant leak sealant.
ProSeal XL4 Inject is compatible with all refrigerants except ammonia. This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Enviro-Safe™ has been producing and packaging sealants for over 17 years. Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014.
Unlike most other products on the market, ProSeal XL4 Inject travels with the gas, which makes it faster, and more effective at finding leaks.
ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions.
Forms a hard seal on metal, schrader valves,
O-rings
, gaskets, a/c condensers, evaporators, line sets and solder joints
Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary.
If there is still Proseal XL4 in the system it will reseal the schrader.
This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils
DO NOT use in ammonia systems
One-time use
Concentrated
No need to pump-down R410 or other units
No injection-hose or caulk-gun needed
Concentrated formula means less material in the system
*The tank is factory sealed in the new EPA & AHRI required color for ALL new tanks made as of 2020. (Gray)
The best replacement for R-22 Refrigerant is R-407c.
It has a very low loss in capacity (0 – 5%) relative to R-22 and is less expensive than many other R-22 replacement refrigerants.
Applications:
Residential Air Conditiong Systems
Industrial Refrigeration Coolers Freezers
Industrial & Commercial Air Conditioning systems including Chillers.
Our 5 Lb. Tank of Refrigerant R-407c comes in a  factory Sealed Cylinder.
Refrigearant R-407c is used as a replacement for R22 systems.
(1) 5 lb. R-407c Factory Sealed Can.
The hose connection is standard, 1/4" male flare.
R407C
R407C is an HFC blend designed to have similar properties to R22 in air conditioning systems. R407C is suitable for residential & light air conditioning and direct expansion air conditioning systems. It is also used in medium temperature refrigeration systems.
The condition is new and the tank is factory sealed in the new, as of 2020, tank color which is gray.