Full Size Printed Plans sport day cruiser for do K & B 3.5cc outboard motor

Description

Full Size Printed Plan & Building Notes
No material plans only
“STINGRAY”
A snappy easy to build and run sport day cruiser for do K & B 3.5cc outboard motor
Full Size plan on a sheet 41" x 30" 20lb bond
Ten page article with building instructions and photos
Length  O.A. 36"
Length Hull 31"
Width 11"
Engine KB 3.5cc Outboard
Radio Two Chanel
BY FRED REESE
The Stingray was designed to be simple to build, fast and attractive, but not be fussy or require extra running hardware that runs the cost up and complicates trimming. I decided that‑ the old flat bottomed SK type hull would be the easiest to build and run. The flat bottomed hull does not need strokes or trim plates as on the deep vees which saves many hours and dollars.
The Stingray, like my Schiada SS‑29 deep vee for the 3.5 outboard and MY Ski Vee40 for the 7.5 and 11cc outboard, is made moody of 1/8" balsa covered with fiberglass. The balsa boats are not expensive, compared, to the all fiberglass kits, and they build up very fast. My Stingray was ready to glass after just three evening's work. I have used the same structure as my first boat but I have refined it some and have eliminated the trouble spots.
Construction
is straightforward and there are no tricks.
"How does it run?" you ask. Well, I couldn't be happier. The Stingray met all of our goals. On the first run in a small pond, it zipped
along,
turning easily and did not spin out in the turns. Since then, I have made many adjustments on the engine height and thrust angle and even reworked the bottom to correct a building error. The Stingray has always run well, it has just gotten better.
30 Day Money back Guarantee
Thank you for looking