Flange Nuts Stainless Steel, Serrated Base for Locking All Sizes Available

Description

Serrated Flange Nuts Stainless Steel Grade 304 With Vibration Resistant Serrations on Base
A flange nut is a nut that has a wide flange at one end that acts as an integrated, non-spinning washer. These nuts have serrations on the integrated washer giving it a "locking" characteristic. This serves to distribute the pressure of the nut over the part being secured, reducing the chance of damage to the part and making it less likely to loosen as a result of an uneven fastening surface.
Detailed Product Information:
Select Desired Size in Drop Down Menu For Full 2D Dimensional Drawing Image
General Information
Size
Drive Size
Flange Diamter
Coarse Or Fine
6-32
5/16"
0.422"
Coarse
8-32
11/32"
0.469"
Coarse
10-24
3/8"
0.500"
Coarse
10-32
3/8"
0.500"
Fine
1/4-20
7/16"
0.625"
Coarse
1/4-28
7/16"
0.625"
Fine
5/16-18
1/2"
0.672"
Coarse
5/16-24
1/2"
0.672"
Fine
3/8-16
9/16"
0.750"
Coarse
3/8-24
9/16"
0.750"
Fine
1/2-13
7/8"
1.031"
Coarse
1/2-20
7/8"
1.031"
Fine
Key Notes:
Stainless steel flange nuts have a wide flange under the hex that acts as a washer which helps to evenly distribute pressure over the parts being secured as to not cause damage and making it less likely to loosen this type of lock nut uses displacement to provide a tight fit and requires slightly less torque when installing
The serrations on the flange are positioned at an angle that bites into the material being fastened against to provent the nut from turning loose but will scratch or mar a surface so if using on a painted or coated surface and moisture could be an issue it is best to choose a fastener that will not run the risk of removing the coating and exposing the mating surface to the possibility oof corrosion
Stainless steel serrated flange nuts work extremely well for oversized or irregularly shaped holes since the flange will cover any discrepancies on the mating surface allowing you to not have to use any washers which can speed up the assembly process also saving time and effor on your project
Serrated flange nuts look like a hex nuts from one side but on the bottom side has a wide circular flange creating a bell like shape; also referred to as serrated face spin lock tooth nuts this type of nut provides better vibration resistance than a standard hex nut
Made from stainless steel grade 304 which offers a high level of chemical and corrosion resistance that will out perform and out last all zinc plated fasteners for years with out the need to perform costly and time consuming maintenance
Shipping:
All orders placed before 3:30 pm EST Will Ship Same Day
Tracking is provided on ALL Orders
Priority Mail Shipping service is offered at a discount of only .95
UPS Ground
UPS Next Day Air is available, Please inquire for pricing
Returns :
ALL returns are accepted if returned within 60 days.
Money Back or exchange guaranteed.
NO Restocking Fees.
For YOU, we constantly strive to find ways of improving our performance.